Reset Canon Printer

Canon BJC-3000 BJC-6000 BJC-6100 BJC-6200 S400 S450 F300 F600 F620 Canon BJC-7000 BJC-7100 BJC-8000 BJ-F800 i6500
1.Power off printer
2.Hold Resume button then press and hold POWER, the beeper will sound once.
3.Hold POWER and release RESUME
4.Press RESUME twice
5.When the indicator lights steady, press RESUME three(3) times. The indicator should be orange.
6.Press Power to set data

Canon BJC-600 BJC-600e BJC-610 BJC-620
1.Unplug Power Cord
2.Hold POWER and FF and Print Mode buttons
3.Plug in Power Cord
4.Release after the beeps

Canon BJC-50 BJC-55 BJC-80 BJC-85 M40 M70
1.Unplug Power Cord
2.Hold POWER and RESUME buttons
3.Plug in Power Cord
4.Release buttons after the printers starts up
5.Hold CARTRIDGE and RESUME
6.Press POWER
7.Release all buttons after the beeps
8.Press CARTRIDGE 16 times
9.Press RESUME
10.Unplug the Power cord

Canon BJ-30 BJC-35v BJC-70
F14 Error Reset
1: Unplug adapter
2: Hold POWER
3: Plug in ADAPTER
4: Release POWER after printer starts
5: Hold FF and MENU and press POWER
6: Release after beeps
7: Press <> Cartridge until 1A is displayed
8: Press ONLINE
9: Press POWER to shutoff printer
10: Unplug printer then re-plug printer


Canon BJ F900, F890, F700, F500, S900, S820, S750 and S520
1.Turn off the printer.
2.Press and hold the RESUME button, then press and hold the POWER button.
3.Release the RESUME button, then press and release the RESUME button two more times in succession. (youre still holding the POWER button during this). The printer mechanics will move momentarily.
4.You are now in Service mode.
5.Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press :
•1 presses     : Service/factory test printout, including ink sensor check
•2 presses     : EEPROM info printout
•3 presses     : EEPROM initialization
•4 presses     : Clear the waste-ink counter
•5 presses     : Printer model setting. (more selections beyond this- leave this alone)
6.After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a resta

Canon S9000, S300, S400, i550, i560, i850, i860, i865, i9100, i9950, PIXMA iP3000 above,
1.Turn off printer
2.Hold down Resume button and press Power button.
3.Keep holding down Power button and let Resume button go.
4.Press Resume button 2 times then let BOTH buttons go.
5.Green lights will flash and then stop blinking.
6.When green lights are solid, press the Resume button 4 times.
7.Press the Power button and the printer should turn off, if not, press the Power button once more.
8.Your printer should respond as normal.
Canon S900, S820, S750, S520
1.Turn off the printer.
2.Press and hold the RESUME button, then press and hold the POWER button.
3.While still holding the POWER button, Release the RESUME button, then press and release the RESUME button two more times in succession.
4.The printer mechanics will move momentarily. You are now in Service mode. Release the Power Button.
5.Pressing the RESUME key will select a function; for example, pressing RESUME 4 times will select the clear waste ink counter function. The lamp will alternate color with each key press.
•1 presses     : Service/factory test printout, including ink sensor check
•2 presses     : EEPROM info printout
•3 presses     : EEPROM initialization
•4 presses     : Clear the waste-ink counter
•5 presses     : Printer model setting. (more selections beyond this- leave this alone)
6.After selecting mode, press the POWER button to commit the change, and return to the top of the function selection menu. Pressing the POWER button again turns off the printer for a restart.

Canon S9000
1.Turn off printer
2.Hold down Resume button and press Power button.
3.Keep holding down Power button and let Resume button go.
4.Press Resume button 2 times then let BOTH buttons go.
5.Green lights will flash and then stop blinking.
6.When green lights are solid, press the Resume button 4 times.
7.Press the Power button and the printer should turn off, if not, press the Power button once more.
8.Your printer should respond as normal.

Canon MPC190
Reset Waste Ink
1.Enter SERVICE MODE.
2.By pressing Menu, Copy, Scan, Copy, Copy
3.Select TEST MODE.
4.Select [8] PRINTER TEST in TEST MODE.
5.Select 3. [EEPROM CLEAR].
6.Select 0. [INK COUNT].
7.Press the [Set] key.
8.Press the [Stop/Reset] key (returning to the state of 3), and then press the [ON/OFF] key.